In order to further cultivate elite talents in the field of construction machinery industry in the future, realize the lifelong learning and skill upgrading of senior professional and technical personnel in the industry, and play a leading role in the field of digital transformation and achievement transfer and transformation, on September 18-22, the senior seminar on "Improvement of Professional and Technical Transfer and Transformation Ability of Intelligent Manufacturing of Construction Machinery" was successfully held in Changsha. The seminar is open to the relevant professional and technical personnel and relevant management positions in the construction machinery industry nationwide, and a total of 75 formal students and more than 30 audit students participated in the training after the recommendation and qualification review of the unit.

Opening ceremony

On the afternoon of September 18, the opening ceremony of the workshop was held at the Hualiang Huatian Holiday Hotel in Changsha City. Li Peigen, academician of the Chinese Academy of Engineering, Ma Wensheng, member of the party group and vice chairman of the Hunan Provincial Association for Science and Technology, Bian Yongming, chairman of the China Construction Machinery Society, Zhou Xianbiao, secretary general of the China Construction Machinery Society, Zhuang Hongquan, vice president of Tsinghua Publishing House, attended the opening ceremony, the organizer Changsha Construction Machinery Industry Association, the co-organizer Hunan Guozhong Zhilian Construction Machinery Research Institute, Hunan Enterprise Science and Technology Association Federation, Hunan Mechanical Engineering Society, Siemens Software Development and other relevant persons in charge attended the ceremony. Before the ceremony, Wang Guishu, Secretary of the Party Group and Executive Vice Chairman of the Provincial Association for Science and Technology, attended the meeting and exchanged views with Academician Li Peigen and Chairman Bian Yongming.

At the opening ceremony, Bian Yongming, chairman of the China Construction Machinery Society, and Ma Wensheng, member of the party group and vice chairman of the Hunan Association for Science and Technology, delivered speeches on behalf of the organizers. Chen Li, deputy secretary-general of the China Construction Machinery Society, presided over the opening ceremony.

Bian Yongming, chairman of the China Construction Machinery Society, delivered a speech

Ma Wensheng, member of the party group and vice chairman of the Hunan Provincial Association for Science and Technology, delivered a speech

After the opening ceremony, Academician Li Peigen gave a lecture on the first lesson of the seminar "AI Enabling Equipment Manufacturing" to the trainees.

September 18th

Li Peigen, academician of the Chinese Academy of Engineering, gave a lecture

Academician Li Peigen introduced the scientific problems of AI and equipment engineering, and introduced the personalized process in engineering technology through the excellent practice cases of typical enterprises. Based on the advantages of AI large models in multi-source analysis, it provides 12 application scenarios for enterprises.

Professor Bian Yongming deeply analyzed the implementation process of several major engineering projects led by himself through the two major sections of "Thirty Years of Synchronous Construction - Looking at the Development of China's Infrastructure Construction" and "New Construction Mode and Engineering Equipment", and introduced the application of the key technologies of the "New Four Modernizations" of construction machinery (electric, green, unmanned and intelligent) in major engineering cases.

September 19th

Wang Jianwei, vice president and executive secretary general of China Electronic Information Industry Federation (former deputy director of the Department of Informatization and Software Services of the Ministry of Industry and Information Technology), gave a lecture on the development status, future trends and policy suggestions of construction machinery digitalization to the trainees, and put forward work suggestions for enterprises to promote digital transformation along the development status, trend analysis, implementation path and typical practice of digital transformation of construction machinery.

Qi Feng, Senior Vice President of Siemens Industrial Software and Visiting Professor of Northwestern Polytechnical University, gave a lecture on how to realize the application of digital twins from virtual reality and create their own industrial Metaverse with the theme of "Industrial Metaverse".

Zhang Hao, chairman of the Shanghai Association for Artificial Intelligence and professor of Tongji University, gave a lecture on "The Progress of Artificial Intelligence and Typical Applications of Intelligent Manufacturing", which outlined the technical application of artificial intelligence in intelligent manufacturing in various industries, and put forward ideas and ideas for the future development trend of intelligent manufacturing.

Song Hefa, Deputy Dean of the School of Intellectual Property of the University of Chinese Academy of Sciences, gave a lecture on "Intellectual Property Cultivation Layout and Transformation Application", reviewed scientific and technological innovation and intellectual property development, intellectual property operation policies, explored the problems and challenges of intellectual property cultivation and operation, and finally put forward the path of intellectual property cultivation layout and transformation and application.

Li Muqian, Deputy Secretary-General of the International Technology Transfer Collaboration Network (ITTN), gave a lecture on "Overview of International Technology Transfer and Technology Commercialization", which elaborated on the concepts of technology transfer, transfer and transformation of scientific and technological achievements, technology commercialization, etc., and analyzed the model of internationally renowned technology transfer institutions.

September 20th

In the field training course on September 20, 100 students visited and studied CRRC Zhuzhou Electric Locomotive Co., Ltd., CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., Sany Heavy Industry Co., Ltd., and China Railway Construction Heavy Industry Group Co., Ltd., four excellent construction machinery enterprises with intelligent production, management and service models.

Field training: CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd

Field training: Sany Heavy Industry Co., Ltd

September 21

Wang Kai, Secretary-General of Shaanxi Provincial Association of Technology Managers, systematically taught the relevant concepts, regulations, and standards of the transfer and transformation of scientific and technological achievements with the title of "Transformation of Scientific and Technological Achievements and Construction of Technical Managers", reviewed the historical period of the transformation of scientific and technological achievements in China, and explored the concept, history, ability and quality requirements and development prospects of technical managers.

Ling Wang, Senior Manager of Global Manufacturing Strategy & Planning at Siemens Industry Software, gave a lecture on "Intelligent Manufacturing for Construction Machinery", detailing how to support the full lifecycle of industrial production with a fully closed-loop digital twin and turn complexity into a competitive advantage for enterprises.

Sun Yun, deputy general manager of China Technology Exchange, gave a lecture on "Reform and Technology Transfer Models and Practices Related to the Transformation of Scientific and Technological Achievements", which summarized the overall situation of China's achievements transformation and technology market, analyzed the transformation mode of achievements from supply to demand, and elaborated on the relevant policies and practices of achievement transformation.

Dr. Zhang Pinghua of Fanji Technology Suzhou Co., Ltd. made technical exchanges

Yuan Zhen, President of Hunan Guozhong Zhilian Research Institute, made practical exchanges

Dr. Zhang Pinghua of Fanji Technology Suzhou Co., Ltd. and Yuan Zhen, President of Hunan Guozhong Zhilian Research Institute, respectively conducted technical and practical exchanges on "Control Technology and Products for Construction Machinery Electrification" and "Thinking and Practice of Building a National Innovation Platform".

September 22nd

Chen Ronggen, chairman of the Maker Headquarters of Peking University, gave a lecture

On the morning of September 22, Chen Ronggen, chairman of the Maker Headquarters of Peking University, gave a detailed lecture on the science and technology financial system and its support for the transformation of achievements in the course of "Science and Technology Finance Empowering the Transformation of Achievements", and introduced the logic, process, path and practical points of specific practical operation, which drew a successful end to the seminar.

Trainee exchanges

In the student exchange session at the graduation ceremony, 6 student representatives from various fields of the industrial chain combined their own work experience to exchange speeches on the course design, teacher level, teaching content and activity guarantee of this seminar.

Zhou Gaobo (deputy general manager of the digital management department), a trainee from Shanghai Zhenhua Heavy Industry (Group) Co., Ltd., said that he deeply realized that the training was ambitious, closely related to the development requirements of the times, and the curriculum was comprehensive, systematic and targeted, and reflected the authority and professionalism in the selection of teachers. This training focused on key contents such as "high-quality development", "new productivity", "digitalization", "intelligence" and "integration", and from the feedback of the students, they all benefited a lot. Although the training time is not long, it has given the trainees more enlightenment and cognitive expansion, and I believe that the trainees will be able to play a greater role in better implementing the new development concept and forging ahead on a new journey in their respective positions.

Tang Chunrong (chief engineer), a student from Zhenjiang Jinrong Electronic Technology Co., Ltd., described the seminar with "six" and "three highs and one good": "broadened my horizons, improved my understanding, learned knowledge, understood the trend, made friends, and increased my knowledge"; "The level of training experts is high, the quality of lecturers is high, the level of training content is high, and the training organization and management are good". Through training and learning, inspiring thinking, further analysis of the production and business characteristics of construction machinery, thinking about the key points and directions of digital construction of construction machinery industry, hoping to have more such learning opportunities in the future.

Xiao Aida (Lianyuan Iron and Steel Scientist), a student from Hunan Valin Lianyuan Iron and Steel Co., Ltd., believes that through the study of this seminar, he has learned about the latest progress and future trends of digitalization and intelligence in the construction machinery industry, and has also systematically learned the knowledge of technology transfer, transformation of scientific and technological achievements, and knowledge and ability system of technical managers. The enterprises visited by on-site training are also worthy of in-depth study and reference by most of our enterprises. In the future work, we will continue to pay attention to industry trends, learn new technologies and concepts, and provide strong support for technology transfer and transformation.

Qin Qianyun (deputy director of the dual carbon equipment center), a student from China Railway Industry Planning and Design Research Institute, said that after 5 days of training and study, he had a deep understanding of the intelligent manufacturing of construction machinery in a comprehensive and systematic way, and a systematic understanding of intellectual property rights, achievement transformation and national policies. Intelligent equipment and intelligent construction are the common requirements of the high-quality development and future trend of the industry, which can play an important role in safety, efficiency, economy and green, and also provide the possibility for extreme working conditions. China Railway Industry is willing to cooperate closely with industry colleagues and engineering units to strengthen joint research in data mining, construction process and intelligent equipment application, jointly promote the progress of the industry, and contribute to the great rejuvenation of the Chinese nation.

Jiang Junming (engineer), a student from China Construction Eighth Bureau New Construction Engineering Co., Ltd., talked about his feelings about learning based on his own work experience, and believed that many of the content in the course was quite high, and many of the knowledge had not been exposed to before, and he had different feelings and touches on each teacher's course. A deeper learning and experience is not in the classroom, but outside the classroom, in life, in work, and only by continuing to experience and feel in life, can we apply what the teacher has learned, and can we have a deeper understanding and thinking, and turn it into our own skills.

He Ziyi (deputy secretary-general), a student from the Hunan Mechanical Engineering Society, expressed his gratitude to the organizer for building this learning and exchange platform, expressed his gratitude to all the staff for their hard work, and expressed his gratitude to more than 100 students in the seminar. At present, the construction machinery industry is experiencing an all-round intelligent and green transformation, and learning at this time is the best opportunity to absorb the strength of endeavor. Theoretical learning is supplemented by spiritual calcium, enterprise training is to build a solid foundation of faith, every achievement and every piece of equipment seen when the enterprise visits, are telling the story of the dream building of a great country. After the training, I took away not only the knowledge imparted by the teachers, but also the experience exchanged by the students, and their own perceptions, reflections and experiences, which were transformed into the strongest motivation for future work.

The advanced seminar on "Improving the Ability of Professional Technology Transfer and Transformation of Intelligent Manufacturing of Construction Machinery" was undertaken by the China Construction Machinery Society, Hunan Science and Technology Association, Changsha Construction Machinery Industry Association, Hunan Guozhong Zhilian Construction Machinery Research Institute, Tsinghua University Press, Hunan Federation of Enterprise Science and Technology Associations, Hunan Mechanical Engineering Society, Siemens Industrial Software, etc. The course of the workshop was broadcast live on the platform of "Science and Technology China".